Soluzioni

OLY TEX CARBO 600 UNI-AX HM – E

OLY TEX CARBO 600 UNI-AX HM – E (high modulus) is a unidirectional fabric in carbon fiber with a weight of 600 g / m² with a high elastic modulus specific for structural consolidation interventions of reinforced concrete elements, reinforced concrete. prestressed, masonry, steel and wood.

The FRP consolidation systems obtained by laying a fabric such as OLY TEX CARBO 600 UNI-AX HM – E with suitable epoxy resins such as OLY RESIN BASE DB (A + B) and OLY RESIN 20 HTG (A + B) guarantee excellent resistance characteristics traction, allow you to easily remedy precarious situations affecting both vertical structures and horizontals, allowing, unlike interventions made with traditional materials, reduced invasiveness, as they allow to keep the dimensions of the previous elements and the weight almost unchanged of the same and therefore of the entire structure. Composite materials have undoubted advantages: very high tensile strength, low specific weight, high resistance to environmental stresses. They also have the advantage of being applied quickly and minimally invasive. The reinforcement properly placed can be subsequently plastered with traditional plasters on the market.

1.    Preparation and cleaning of the substrate in order to obtain perfectly clean and dry surfaces with sufficient mechanical characteristics.

2.    In the case of irregular surfaces, it is necessary to regularize it with suitable hydraulic mortars or epoxy resins in paste.

3.    Application by brush of a first layer of two-component epoxy resin OLY RESIN 20 HTG (A + B) following the instructions in the relative technical data sheet.

4.    Installation of the OLY TEX CARBO 600 UNI-AX HM – E fabric with fibers oriented as per project and subsequent treatment with a special bubble-breaking roller.

5.    Apply a second layer of OLY RESIN 20 HTG “fresh” and subsequent treatment with a special bubble-breaking roller.

If the subsequent laying of civil plasters is necessary, it is advisable to first carry out a manual dusting with quartz sand on the still “fresh” system to increase the useful surface of adhesion.

The fabric is available in rolls of 50 ml, with variable widths.